BJLYW - POLY BD R-45M RESIN

  • MSDS: BJLYW
  • Manufacturer: SARTOMER CO (PONY)
  • Product Name: POLY BD R-45M RESIN
  • National Stock Number: 8030-00N012040
Product Identification

Product ID:POLY BD R-45M RESIN
MSDS Date:06/08/1987
FSC:8030
NIIN:00N012040
MSDS Number: BJLYW

Responsible Party
SARTOMER CO (PONY)
BOLMAR AND NIELDS STS
WEST CHESTER, PA 19382
US

Emergency Phone: 215-692-8401

Info Phone: 215-430-2200

Cage: HO734

Contractor
SARTOMER COMPANY,INC.WHOLLY OWNED SUBSIDIARY OF OR
WEST CHESTER,, PA 19382 US

Telephone: 215-692-8401

Cage: 65093

Ingredients

PLANT BIOMASS.ASSURE EFFLUENT COMPLIES

RTECS: 9999999ZZ


OTHER WORK

RTECS: 9999999ZZ


BEFORE EATING,DRINKING,SMOKING/USING TOILET

RTECS: 9999999ZZ


REUSE. SHOWER AFTER WORK USING PLENTY OF SOAP AND WATER.

RTECS: 9999999ZZ


HYDROXYL TERMINATED POLYBUTADIENE

CAS: 69102-90-5

Fraction By Weight: 99.9%


MAY TRAVEL LG DIST ALONG GRND BEFORE

RTECS: 9999999ZZ


COMBUSTIBLE AT TEMPERATURES BELOW NORMAL FLASH POINT.

RTECS: 9999999ZZ

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL:NO APPROP HUMAN/ANIMAL HLTH EFTS
DATA KNOWN TO EXIST.EYE:PRIMARY RTE,MAY CAUSE MINOR EYE
IRRIT.SKIN:NO APPROP HUMAN/ANIMAL HLTH EFTS DATA.SKIN:PRIMARY
RTE,MAY PRDCE SKIN IRRIT.INGEST:NO SIGNIFIC ANT SIGNS/SYMPS
INDICATIVE OF ADVERSE HLTH HAZ EXPECTED TO OCCUR AS RESULT OF
INGESTION.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS
Medical Cond Aggravated by Exposure:NO ADDITIONAL MEDICAL INFORMATION
FOUND.

First Aid

First Aid:INHAL/INGEST:NOT EXPECTED TO PRESENT SIGNIFICANT HAZ UNDER
ANTICIPATED CNDTN OF NORM USE.INHAL:SUPPORT BRTHG(GIVE O*2/ARTF
RESP) CALL MD IMMED .INGST: CALL MD IMMED .EYE:IMMED RINSE W/CLEA N
H*2O/20-30 MIN.RETRACT LIDS OFTEN. GET MD IF PAIN,BLINK,TEARS/RED
PERSIST.SKIN:REMOVE CONTAM CLTHG.WASH SKIN THORO W/MILD
SOAP/H*2O.FLUSH W/LUKEWARM H*2O FOR 15 MIN.IF STICKY,WATERLESS
CLEANER FIRST

Fire Fighting

Flash Point Method:OC
Flash Point:400F,204C
Extinguishing Media:DRY CHEMICAL, CO2, WATER SPRAY, FOAM, WATER FOG
Fire Fighting Procedures:DO NOT ENTER FIRE AREA W/O PROPER PROT.FIGHT
FIRE FROM SAFE DISTANCE/PROTECTED LOCATION.HEAT MAY BUILD
PRESS/RUPTURE CLSD CNTRS SPREADING FIRE, (SEE SUPP DATA)
Unusual Fire/Explosion Hazard:HEAT FROM FIRE CAN GENERATE FLAM VAP.WHEN
MIXED W/AIR,EXPOSED TO IGNIT SOURCE,VAPS CAN BURN IN OPEN/EXPLODE
IF CONFINED.VAPS MAY BE HVR/AIR. (SEE INGRED 2)

Accidental Release

Spill Release Procedures:SLIPPERY WALKING/SPREAD GRANULAR COVER.
IMPOUND, RECOVER LARGE LAND SPILL;SOAK UP SMALL SPILL.ON WATER,MATL
INSOLUBLE/FLOATS. CONTAIN/MINIMIZE DISPERSION/COLLECT. REPORT PER
REGULATORY REQUIREMENTS. R EMOVE SMALL LEAKS/SPILLS W/SOLID ABSORB.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE AWAY FROM HEAT,SPARKS,OPEN
FLAMES,STRONG OXIDIZING AGENTS.USE ONLY NON-SPARKING TOOLS. PROTECT
FROM FREEZING.IF FROZEN, THAW (SEE OTHER PREC)
Other Precautions:HNDLG/STOR:AND MIX THOROUGHLY BEFORE USE. AVOID
OVERHEATING WHICH MAY ADVERSELY AFFECT QUALITY OF OVERPRESSURE
CONTAINERS. LIQ MATL IS SLIPPERY. USE CAUTION TO AVOID FALLS
CAUSING SERIOUS INJURY.

Exposure Controls

Respiratory Protection:NO SPECIAL RESPIRATORY PROTECTION EQUIPMENT IS
RECOMMENDED UNDER ANTICIPATED CONDITIONS OF NORMAL USE WITH
ADEQUATE VENTILATION.
Ventilation:NO SPECIAL VENT IS RECOMMENDED UNDER ANTICIPATED CONDITIONS
OF NORMAL USE BEYOND THAT NEEDED FOR NORMAL COMFORT CONTROL.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:CHEM WORKERS GOGGLES/FACESHLD OPT.
Other Protective Equipment:APRON,BOOTS,HEAD & FACE PROT SHOULD BE WORN.
EQUIP SHOULD BE CLEANED THOROUGHLY AFTER USE. DO NOT WEAR CNTCT
LENSES.
Work Hygienic Practices:EMER EYEWASH FOUNTAINS/SAFETY SHOWERS SHOULD BE
AVAILABLE IN IMMEDIATE VICINITY OF POTENTIAL EXPOSURE. (SEE INGRED
5)
Supplemental Safety and Health
FIRE FIGHT PROC:INCREASING RISK OF BURNS/INJURIES.DO NOT USE SOLID
WATER STREAM/MAY SPREAD FIRE.USE WATER SPRAY/FOG FOR COOLING.AVOID
FROTHING/STEAM EXPLO.AVOID DIRECT PERSONAL CNTCT W/LIQ EVEN AFTER
FIRE IS OUT TO PVNT POTNTL SERIOUS BURNS.NOTIFY AUTHORITIES IF
LIQUID ENTERS SEWER/PUBLIC WATERS.

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:572F,300C
Spec Gravity:.90 @ 25C
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR, COLORLESS, VISCOUS LIQUID W/MILD HYDROCARBON
ODOR.
Percent Volatiles by Volume:NEG

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, STRONG ACIDS
Stability Condition to Avoid:OXIDIZING CONDITIONS, EXTREME TEMPERATURES
Hazardous Decomposition Products:SMALL QUANTITIES OF BUTADIENE,ALONG
W/CARBON MONOXIDE AND CARBON DIOXIDE, MAY BE RELEASED DURING A
FIRE.

Disposal

Waste Disposal Methods:LANDFILL SOLIDS AT PERMITTED SITES.USE
REGISTERED TRANSPORTERS.BURN CONC LIQ,DILUTING W/CLEAN,LOW
VISCOSITY FUEL.AVOID FLAMEOUTS.ASSURE EMISSIONS COMPLY W/APPLICABLE
REGS.DILUTE AQUEOUS WASTE MAY BIOD EGRADE.AVOID
OVERLOADING/POISONING (SEEINGRED 4)

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.